Stainless Steel wire is available from Jewel Wire up to size .250 diameter. This Stainless Steel can be used as stem wire, winding wire, draw wire, staple wire and retaining wire in the manufacturing of brushes. Other uses for this material could be rivets, screws, cables, redraw wire and springs.

SPECIFICATIONS

TYPE 302, 304, 316
Stem, Winding, Draw, Staple, Retaining

SIZE DIAMETER CONDITION SIZE DIAMETER .010" to .050" Soft Annealed 1/4 - 1/2 Hard 5 - 50 Lb. Spools .030" to .070" Soft Annealed 1/4 - 1/2 Hard 16" Coils .071" to .250" Soft Annealed 1/4 - 1/2 Hard 22" Coils

**Special tensile strengths and packages are available upon request. Please be specific in inquiries and orders.

POP-UP CONVERSION TABLES - These small conversion scripts will appear in a small window at the top of the screen, allowing you to view this page at the same time. Inch-Millimeter Conversion Tensile Strength Conversion (1) (kgf/mm2 - > lbf/in2) Tensile Strength Conversion (2) (kgf/mm2 - > N/mm2 or MPa) Wire Gauge Comparison

UTILITIES PAGE - Lists and links all available conversion tables and charts to assist you.

| Return to the top |
| Return to the Web version |

Saturday, July 5, 2008 Copyright 1999-2001 by The Jewel Wire Company. All Rights Reserved. [ Email: sales@jewelwire.com | Phone: 860-928-6681 | Fax: 860-928-6768 ] Site Design by Pomfret Computer Technologies